Connected Services: Garmin Connect, Strava, Relive, Wahoo, Hammerhead, and Coros

_____________________________________________________________________

Download the Ride with GPS mobile app

_____________________________________________________________________

We offer two different ways of syncing your Ride with GPS routes to Garmin devices. Learn about all the available options on our Garmin Sync page.

Connected Services Overview

1. Log into your account on our website: ridewithgps.com
2. Click your profile icon in the upper right corner > select Settings
3. Click Connected Services on the left side of the screen 
4. Click to connect to your preferred service. Note: you can connect with multiple available services at once!

To disconnect any of these options from your RWGPS account, access the Connected Services page, then click the link to unlink your accounts. 

Garmin Connect 

Sign in to your Garmin Connect account and to enable route and ride syncing with your Garmin device. For more details on using Garmin Connect, and additional options to share Ride with GPS data to your Garmin device, check out our Sync with Garmin page. 

Strava

Connect your Ride with GPS account to Strava to automatically sync rides recorded with our mobile app, or manually uploaded from a Garmin unit, to your Strava account. Future rides will upload to Strava, and default to your Strava account's privacy settings. This privacy setting may be different than your Ride with GPS activity privacy. 

Important notes:

• Recorded Rides on the Ride with GPS app will only sync activities to Strava from the time of sync forward. It will not pull older data from your Ride with GPS account to Strava.
• The sync process will not pull data from Strava to Ride with GPS.
• It will not sync Wahoo recorded rides.
• Sometimes it can take up to 24 hours before your rides begin syncing over to Strava. Any rides recorded within this time period may not sync automatically. 

Connect with Strava

• Log into your account at www.ridewithgps.com
• Click your profile icon in the upper right > click Settings
• Click Connected Services
• Click Connect with Strava. 

• If you aren't already signed into Strava, you will be asked to enter your Strava credentials.

• Click the Authorize button so that Ride with GPS has permission to upload activities to your Strava profile.

 

---

Looking to bring your ride history from another app or website to your Ride with GPS account?  Check out the Migrate your Data article for more information. 

---

Relive

Relive turns your Ride with GPS recordings into 3D videos to tell the story of your trip. You'll first need to create a free account with Relive, and can unlock all features with a Relive Plus paid upgrade. You can create an account within their app, available for download via the App Store for iOS and Google Play Store for Android.

Connect with Relive

1. Log into your account at www.ridewithgps.com.
2. Click your profile icon in the upper right > click Settings.
3. Click Connected Services.
4. Click Connect with Relive.

If you aren't already signed into Relive, you'll be asked to enter your Relive credentials.

Click Allow to grant RWGPS permission to upload activities to your Relive profile.

 

Create a Ride's Relive Video

1. Record and save a ride on the Ride with GPS app, or upload from your Garmin or Wahoo device.
2. Open the Relive App.
3. Select the ride you want to Relive.
4. Add a title and other optional details.
5. Tap Create in the upper right.
6. Relive will generate a video to view on their app.

Check out the example below of what you can create by linking your Ride with GPS account to Relive.

Relive 'Saddle Mountain Scorcery'  

Wahoo

Connect your Wahoo account to sync your entire route library with your Wahoo BOLT or ROAM. Pro tip: you can archive any routes that you don't want to bring over.

Hammerhead

Seamlessly transfer your routes and ride data between your Hammerhead Karoo and Ride with GPS account. Pin your routes for instant access on your device, and automatically sync your recorded ride data straight to your Ride with GPS account.

Connecting Ride with GPS and Hammerhead

1. Log into your account on our website: www.ridewithgps.com
2. Click your profile icon in the upper right corner > select Settings
3. Click Connected Services on the left side of the screen
4. Locate the Hammerhead option, and click Connect with Hammerhead
5. You'll be taken to a log in page for Hammerhead, where you can log in to an existing Hammerhead account
6. Click Authorize to allow Ride with GPS to access your Hammerhead account

Pin Routes to Sync with Hammerhead

Once you've connected Ride with GPS and Hammerhead, pin any route on web or mobile to sync wirelessly from your Ride with GPS account to your device. 

Automatic Ride Sync with Hammerhead

Once set up, automatic ride sync via Hammerhead is a one-way process which uploads recorded ride data from your device, syncs via your Hammerhead account, and transfers your recorded rides directly to your Ride with GPS account. If you'd like to disable this, you can do so from your Hammerhead Dashboard:

1. Log in to your Hammerhead dashboard
2. Click the three dots icon, then select Settings
3. Toggle your Ride Upload Mode from Automatic to Manual
   

Coros

Connect Ride with GPS and Coros

1. Log into your account on our website: ridewithgps.com
2. Click your profile icon in the upper right corner > select Settings
3. Click Connected Services on the left side of the screen
4. Locate the COROS option, and click Connect with COROS
   
   
5. You'll be taken to a log in page for COROS, where you can log in to an existing COROS account
6. Check the box to allow Ride with GPS access to your COROS workouts
   

Pin Routes to Sync with COROS

Once you've connected Ride with GPS and COROS, pin any route on web or mobile to sync wirelessly from your Ride with GPS account to your device. 

On the website, you can pin a route by clicking the Pin button in the upper right hand corner.

In the mobile app, tap Save and then Pin to pin the route. 

Automatic Ride Sync with COROS

Once set up, automatic ride sync via COROS is a one-way process which uploads recorded ride data from your device, syncs via your COROS account, and transfers your recorded rides directly to your Ride with GPS account.